Wednesday 28 January 2015

Review: Philips BDM4065UC review

Review: Philips BDM4065UC review

Introduction and specs


Ten years. It's a staggeringly long time in tech.


Back in 2005, you'd be looking at a dual-core Intel Pentium D and its craptastic NetBurst architecture. On the graphics side, it's Nvidia GeForce 6800 and 16 pixel pipes. Wowee. As for storage, the notion of an SSD wasn't even a twinkle in the NAND industry's eye.


It was a very different time.


Yet it was nearly a decade ago Dell wheeled out the monitor by which pretty much all others have since been measured, the 3007WFP, and then the 3007WFP-HC.


And, yes, more recently some interesting technologies have cast doubt on the Dell's mastery, that's for sure. But the broader point holds: a decade-long reign at the top is extraordinary.


It's impossible to imagine for any other major component.


But here we are in early 2015 and it looks like a new high-end default in the monitor market has arrived, at least in terms of the form factor – if perhaps not this actual Philips BDM4065UC.


Let's find out why.


Pixel perfection?


Even before the Philips BDM4065UC arrived at Future Towers, we had a notion that when it came to 4K PC monitors, the HDTV market was going to be particularly relevant.


HDTVs have always offered better value for money than monitors because they're cranked out in mega volumes.


The problem is, until recently, they've all been 1080p models at best. Once you get beyond 24 inches, that means pretty big pixels. Step that up to 40 inches or more and things get really ugly.


Conventional HDTVs, then, have made pretty poor PC monitors.


Meanwhile, the first budget 4K monitors have appeared, but offered just 28 inches, diagonally. Hardly titchy, but when you've got nearly 4,000 pixels across the horizontal, the dot pitch is tiny – and that generates all kinds of problems in Windows.


Either you leave the scaling at 100 per cent so that everything is squintingly small, or you tweak the Windows and browser scaling settings and everything looks hideous.


But what if you had a 4K PC monitor that was 40 inches in diagonal?


Then you'd have a monitor on an epic scale with a pixel pitch in that workable window where it's fine enough to enable a crisp, sharp image, but not so fine you have to deal with the scale-or-not-to-scale dilemma.


And guess what, 40 inches is bang into budget HDTV territory in terms of panels and production volumes. That explains why this massive, 40-inch, 4K Philips is cheaper than existing 30-inch 2,560 by 1,600 pixel monitors.


Hold on though, you can't just take a 4K HDTV off the shelf and use it as a PC monitor.


That's because the bandwidth limitations of the current HDMI standard restrict it to just 30fps over a single connection. What you need is the latest DisplayPort 1.2 interface, and you don't get that with TVs. Instead, Philips has taken one of its budget 4K HDTV models, ripped out the TV tuner guff, and bunged in a DisplayPort 1.2 interface to allow a 60Hz refresh from a single transport stream.


No frills – just the minimum you need from a PC monitor.


That's great news. The main upsides are the affordability – okay, £600 is still a lot of money, but spread that over five, six, seven or more years and the annual cost looks reasonable.


Then there's the slimline shape of the chassis and the super-skinny bezel in traditional HDTV style. Sitting next to that epoch-defining Dell 3007, the old master looks tiny, dated and knackered.


Verdict


It's not all good news, however.


The most obvious downside is a stand that doesn't adjust. At all. Though you do have the option of using the 200mm VESA mounts on the back to cook up something.


The real problem though is with the panel itself.


In some ways it's a glorious thing on a wondrous scale. Once you've seen something like Shadow of Mordor running at 4K on a 40-inch panel, you're pretty much ruined for other screens. Even those 34-inch, 21:9 aspect screens – which we still love – look a bit puny.


Actually, it could be too much of a good thing, with the 4K pixel grid exposing any low-res textures with ruthless efficiency. Oh, and if you're wondering, the semi-gloss panel surface works well. It had us a bit worried, but reflectivity is blessedly limited.


Where the HDTV-ness kicks in with an unambiguous negative is the VA, or Vertical Alignment, rather than IPS panel tech.


It delivers lovely deep blacks and nice, rich colours, but also serves up viewing angles that are basically a bit broken.


The problem is most obvious at the extremities of the display, especially along the bottom. If you sit back far enough, the issue resolves – but this is a PC monitor and the whole point is that you sit close.


Is it a deal-breaker? Probably not, but it is enough, along with the stand, to make us wonder whether the Philips BDM4065UC is only suitable for early adopters willing to make compromises.


Of course, what we haven't mentioned is the sheer load any 4K panel puts on your graphics card; no single GPU is currently up to the job of running the latest games at 4K and full detail. Even multi-GPU setups with high-end cards will struggle.


In mitigation, this screen looks pretty decent running 1440p interpolated. So you could take the long term view – buy now and plan on a GPU upgrade in a couple of years – that should see you enjoying many years of native-res 4K gaming.


But it's a different psychology from buying something that performs at its best from the beginning.


Plenty to think about, then, and at the very least a tantalising glimpse of the 40-inch 4K form factor that could be the weapon of choice for high-end gaming for the foreseeable future.


We liked


The sheer scale of this screen is magnificent. At 40-inches it really makes the most out of the increased detail of a 4K resolution and you'd be surprised just how quickly you get used to the panel size even on a desktop setup.


The actual design of the monitor is neat too, taking the HDTV aesthetic and running with it. That also means it's got a nice, slim bezel around the panel too.


And, despite the high price-tag, the BDM4065UC is great value considering 30-inch, 2560 x 1600 monitors are still far more expensive.


We disliked


There are problems with the screen itself. The VA panel isn't perfect and you do get definite viewing angle issues at the extremities of the screen when you're sat close to it.




We're also not taken with the fact the HDTV stand is completely non-adjustable either. That makes getting a perfect view on your desktop actually a little tricky.


Verdict


The first 4K monitor to make us see the real benefit of the super resolution for our PC games. It's not the absolute perfect monitor, but it's close enough to make us hugely tempted to make the purchase. The 40-inch 4K Philips BDM4065UC will still stand the test of time so when you've finally got the GPU horsepower to drive the panel at its native resolution it'll still be a great screen.




















from TechRadar: Technology reviews http://ift.tt/1Hc3Td6

No comments:

Post a Comment

Back to top ↑
Connect with Us

    Popular Posts

    Powered by Blogger.

    Pages

    About

What they says

© 2013 techmobile. WP Mythemeshop Converted by Bloggertheme9
Blogger templates. Proudly Powered by Blogger.